Flange Insulating Gasket Kits
Flange insulating gasket kits are used to solve the sealing and insulating problems of flanges, and to control losses due to corrosion and leakage of pipelines.Flange insulating gasket kits are widely used to seal flanges and control stray electric currents in piping at oil, gas, water, refinery, and chemical plants, to increase the effectiveness of cathodic protection systems.
Send Inquiry
Product Description
Flange insulating gasket kits are used to solve the sealing and insulating problems of flanges, and to control losses due to corrosion and leakage of pipelines. Flange insulating gasket kits are widely used to seal flanges and control stray electric currents in piping at oil, gas, water, refinery, and chemical plants, to increase the effectiveness of cathodic protection systems.
Application of Flange Insulating Gasket Sets:
To limit the extent and cost of cathodic protection current to only those pipes that need to be protected from the main cathodic protection system
To electrically "split up" long pipelines into distinctive cathodic protection systems
To isolate a pipeline to ensure that cathodic protection or stray electricity currents do not cause increased corrosion, or cause a hazard
To isolate piping systems where dissimilar metals are present
To eliminate static loading charge transfer in discharge or loading operations at oil storage terminals
Application of Flange Insulating Gasket Sets:
To limit the extent and cost of cathodic protection current to only those pipes that need to be protected from the main cathodic protection system
To electrically "split up" long pipelines into distinctive cathodic protection systems
To isolate a pipeline to ensure that cathodic protection or stray electricity currents do not cause increased corrosion, or cause a hazard
To isolate piping systems where dissimilar metals are present
To eliminate static loading charge transfer in discharge or loading operations at oil storage terminals
Insulation Gasket Type:
Type E (Full Face Gasket)
This gasket kit provides complete protection of both flange faces. The gasket has same outside diameter of flanges. This feature will prevent collection of foreign matter between the flange faces to ensure complete cathodic isolation.
Type F (Ring Type Gasket)
Type F (Ring Type Gasket)
This gasket is manufactured to fit only the raised face surface of the flanges. Outside diameter of the gasket is designed to be slightly less than the inside diameter of the bolt circle. It is recommended that the flanges be wrapped to prevent foreign material from "shorting out" the flanges.
Type D (RTJ Gaskets)
To fit RTJ flanges. They can be produced according to ASME and API flange standard.|
Sealing Gasket Physical Properties
|
|
Property
|
Plain
Phenolic |
Neo-faced
Phenolic |
Silicone
Glass G-7* |
Epoxy
Glass G-10 |
Epoxy
Glass G-11 |
|
Dielectric strengths,
Volts/mil |
500
|
500
|
350-400
|
550
|
550
|
|
Compressive strength,
psi |
25,000
|
25,000
|
40,000
|
50,000
|
50,000+
|
|
Water absorption, %
|
1.6
|
1.6
|
0.07
|
0.10
|
0.10
|
|
Insulating Resistance,
Meg Ohms |
40,000
|
40,000
|
2,500
|
200,000
|
200,000
|
|
Flexural strength, psi
|
22,500
|
22,500
|
27,000
|
45,000
|
43,000
|
|
Operating temp, ºF
|
-65 to +220
|
-65 to +175
|
-292 to +450
|
-292 to +280
|
-292 to +349
|
|
Operating temp, ºC
|
-54 to +104
|
-54 to +79
|
-180 to +232
|
-180 to +138
|
-180 to +176
|
|
* = G-7 material should not be used with hydrocarbons, not even trace amounts.
Seal Element Temperature Limits
|
|
Nitrile
|
Viton
|
Teflon
|
Neoprene
|
EPDM
|
|
-65 to +250°F
|
-20 to +350°F
|
-292 to +450°F
|
-40 to +248°F
|
-65 to +248°F
|
|
-54 to +121°C
|
-29 to +177°C
|
-180 to +232°C
|
-40 to +120°C
|
-54 to +120°C
|
Consider both retainer and seal element temperature limits together for KXT-110 and KXT-120 Sealing Gaskets.
Flange Insulation Gasket Set is becoming more and more important in the industry of oil&gas, petroleum, chemical, refinery.
Hot Tags:
Product Tag
Related Category
Send Inquiry
Please feel free to give your inquiry in the form below. We will reply you within 24 hours.
